home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
EnigmA Amiga Run 1996 February
/
EnigmA AMIGA RUN 04 (1996)(G.R. Edizioni)(IT)[!][issue 1996-02][Skylink CD III].iso
/
earcd
/
util3
/
idefix.lha
/
Docs
/
EjectCD.doc
< prev
next >
Wrap
Text File
|
1995-02-06
|
3KB
|
132 lines
Welcome to EjectCD!!!
-----------------------------------------------------------------------------
LEGAL STUFF
EjectCD © Elaborate Bytes, Oliver Kastl
This software has been licensed to bsc büroautomation AG for use with
their hardware.
All other rights reserved.
-----------------------------------------------------------------------------
GENERAL
EjectCD opens a small window with an "EJECT" gadget. It has been made,
because the Eject button of some CD-Rom drives are a little
bit misplaced and very small.
The window opened is very small, so it won't disturb you much on a normal
sized workbench or default public screen.
This program will refuse to work with Kickstart or Workbench versions
below 2.04.
INSTALLATION
Use the supplied installation program to install EjectCD.
STARTING EJECTCD
Double-click on the program's icon to start.
The program will get the proper device and unit number out of its ToolTypes.
The installation program has entered the correct values here.
When starting from the CLI, you must specify the proper device name und unit
number.
ERRORS WHILE STARTING:
If the program refuses to start, there might be something wrong.
For the most common errors during startup, an error message will be displayed:
"NO BOARD FOUND":
The specified device refused to open, because it couldn't find the controller
card. Please check the hardware installation! Check also the UNIT tooltype!
"CDROM NOT FOUND":
The device refused to open, because it couldn't find the cdrom drive
connected to a controller card. Probably it is not powered up. Please check
the hardware installation and cabling! Check also the UNIT tooltype!
"OPEN DEVICE ERROR":
The device couldn't be opened for some unknown reason.
Please check the proper software installation! Use the installation program!
Check also the DEVICE and UNIT tooltypes!
QUITTING EJECTCD
To get rid of EjectCD you can:
1. Hit the close gadget
2. Select "QUIT" from the menu Items
3. Use right-Amiga-key + Q from the keyboard
THE MENUES
ABOUT:
This menu item gives you information about the EjectCD program.
You may also use the keyboard shortcut right-Amiga-key and A to pop up the
information requester.
Please note: During the information requester is shown, internal program
operations are halted. No gadget or menu operations are permitted.
QUIT:
This will quit the program. It has the same function as hitting the close
gadget. You may also use the keyboard shortcut right-Amiga-key and Q to quit.
THE GADGETS:
[^]
This is the EJECT gadget. It will open/close the cd tray on Mitsumi FX-001
drives.
MENU SHORTCUTS:
Right Amiga key + A = About
Right Amiga key + Q = Quit (same as hitting the close gadget)
TOOLTYPES
Here are the tooltypes of the EjectCD.info file listed:
DEVICE=name.device
Name of the exec.device driver. The Installation program should have filled
in the correct name.
UNIT=number
Unit number of your driver. The Installation program should have filled
in the correct unit number.
NOWIN
If NOWIN is specified, EjectCD will not open a window.
PUBSCREEN=name
The name of the public screen, you wish EjectCD to open its window.
If this screen cannot be found or no screen is specified, the default public
screen will be used.
END OF DOCUMENT